核辐射检测仪
首页 > LK-3600核辐射检测仪|核辐射测量仪|个人剂量报警仪LK3600
产品图片
产品说明

LK-3600核辐射检测仪|核辐射测量仪|个人剂量报警仪LK3600

LK-3600仪器特点
1、灵敏度高,稳定可靠。
2、超大液晶显示,并有汉字显示功能,状态显示一目了然。
3、测量射线剂量率,显示剂量率、累积剂量和存储累积剂量,有多种剂量率报警阈值可供选择,根据剂量率大小和精度要求高低选择测量时间,一般测量时间选择02s,测量剂量比较小的本底剂量时请选择10、20秒。
4、专门设计了本底测试功能,可检测仪器是否能正常工作,方便自检和计量部门检查。
5、具有累积剂量存储功能,断电后数据可永久保存不丢失。
6、功耗低,体积小,携带方便。
7、仪器操作简单,使用方便。


主要技术性能
1、G-M计数管经补偿,低能响应得到提高。
2、仪器灵敏度高,对环境本底会有响应。
3、适用辐射场合γ、χ射线。
4、测量范围:剂量率:0.000usv/h—5msv/h
             累积剂量:6位液晶显示000.000—999.999msv
5、能响:<±30%(50KeV—1.3MeV)。
6、相对基本误差:<±10%(137Cs 源662 KeVγ辐射1msv/h)。
7、报警响应时间:≤3秒。
8、报警功能
剂量率阈值报警:报警阈值为0.5、1.0、2.5、10、30、50usv/h。
9、本仪器具有累积剂量存储功能。断电后存储器的数据可永久保存不丢失,可进行100万次存储擦除。
10、电池欠压指示:在仪器液晶右上角显示电池电压图标,电量标示满三格电池电量大约2.8V-3.2V,电量标示二格电池电量大约2.5V-2.8V,电量标示一格电池电量大约2.1V-2.5V,电量标示无格电池电量在2.1V以下,处于欠电状态。
11、工作环境要求:温度:-10 -- +50℃ 湿度:达90%(无冷凝)

 


LK-3600 personal radiation alarm dosimeter is a kind of small-scale equipment, which is made by new SCM technology, can work in relatively harsh environment, and with strong anti-interference ability. It is mainly used to detect χ rays and γ ray, according to LCD screen you can directly read the "RATE"; "DOSE" and "STORE DOSE". In the range of measurement, the value can be pre-fixed or threshold pre-alarmed, it would emit sound-light alarm when the value displayed exceed the threshold or blocked, prevent workers from being injured by excessive dose. The instrument is low power consumption, multi-function, small size, convenient taking. It is widely used in NDT, nuclear power station, nuclear submarine, isotope application and hospital cobalt treatment etc.


Main Technical Performances
1,Through G-M counter compensation, improve the low-energy response.
2,Instrument with high sensitivity, will respond to the natural environment.
3,For radiation occasions γ, χ rays.
4,Measuring range, dose rate: 0.000usv/h—5msv/h
accumulated dose: 6-digit LCD display 000.000—999.999msv
5,Energy response: <±30% (50KeV—1.3MeV).
6,Relative basic error: <±10%(135Cs Source 662 KeV γ Radiation 1msv/h).
7,Alarm response time: ≤3 seconds.
8,Alarm function
Dose rate threshold alarm: alarm threshold value: 0.5,1.0,2.5,10,30,50usv/h.
9,With accumulated dose memory function, after power-failure, data can be stored permanently, it can undertake 1 million times storage and erased.
10,Battery voltage indication.
Icon shows the battery voltage in the upper right corner of instrument LCD, when battery shows three full grids, power is about 2.8V-3.2V, when battery shows two grids, the power is about 2.5V-2.8V, when battery shows one grid, the power is about 2.1 V-2.5V, when battery shows without grid , the power is under 2.1V, it is in the state of less power.
11,Working environment requirements:
Temperature:-10 - +50℃ Humidity: reach 90% (no condensation)

(点击统计:)